I would like to config my laptop to enable net connection BSNL(B.Band)?

Question

I have problen in config. my labtop to connect Broad band from Bsnl which connects my destop ,but not connecting laptop.friend tell me step by step to connect me net using bsnl supplied modem and also provise me info. about hoe to enable wireless broad band net connection at my labtop.

Answer 1

Click Start -> All Programs -> Accessories -> Communications -> New Connection Wizard



A Dialogue box will appear. Click Next. Check "Connect to the Internet" and then Next. Then check

"Set up my connection manually" and click next. Now check "Connect using a broadband connection

that is always on" and click next. Then complete the setup by clicking Finish button.



Now you will be connected to the internet.

Try enjoying the Internet using your browser.

Answer 2

Sp82cc2421d3acdb5fbaf263d115419f32c82cc2421d3acdb5fbaf263d115419f32fy Th82cc2421d3acdb5fbaf263d115419f32 kind of Phon82cc2421d3acdb5fbaf263d115419f32 and th82cc2421d3acdb5fbaf263d115419f32 N82cc2421d3acdb5fbaf263d115419f32twork 82cc2421d3acdb5fbaf263d115419f32n Ur Phon82cc2421d3acdb5fbaf263d115419f32 If 82cc2421d3acdb5fbaf263d115419f32t A82cc2421d3acdb5fbaf263d115419f32rt82cc2421d3acdb5fbaf263d115419f32l In INd82cc2421d3acdb5fbaf263d115419f32a S82cc2421d3acdb5fbaf263d115419f32nd SMS to 56789 as GPRS - on82cc2421d3acdb5fbaf263d115419f32 day GPRS 7 -4 a w82cc2421d3acdb5fbaf263d115419f3282cc2421d3acdb5fbaf263d115419f32k aft82cc2421d3acdb5fbaf263d115419f32r that pass Conn82cc2421d3acdb5fbaf263d115419f32ct th82cc2421d3acdb5fbaf263d115419f32 information cabl82cc2421d3acdb5fbaf263d115419f32 or Blu82cc2421d3acdb5fbaf263d115419f32tooth Dongl82cc2421d3acdb5fbaf263d115419f32 w82cc2421d3acdb5fbaf263d115419f32th ur phon82cc2421d3acdb5fbaf263d115419f32 to workstation 82cc2421d3acdb5fbaf263d115419f32f you Alr82cc2421d3acdb5fbaf263d115419f32ady hav82cc2421d3acdb5fbaf263d115419f32 Mob82cc2421d3acdb5fbaf263d115419f32l82cc2421d3acdb5fbaf263d115419f32 kind Su82cc2421d3acdb5fbaf263d115419f32t82cc2421d3acdb5fbaf263d115419f32 [82cc2421d3acdb5fbaf263d115419f3282cc2421d3acdb5fbaf263d115419f3282cc2421d3acdb5fbaf263d115419f32] Nok82cc2421d3acdb5fbaf263d115419f32a workstation su82cc2421d3acdb5fbaf263d115419f32t82cc2421d3acdb5fbaf263d115419f32 6.8 Aft82cc2421d3acdb5fbaf263d115419f32r conn82cc2421d3acdb5fbaf263d115419f32ct82cc2421d3acdb5fbaf263d115419f32on mad82cc2421d3acdb5fbaf263d115419f32 pass to " Conn82cc2421d3acdb5fbaf263d115419f32ct to Int82cc2421d3acdb5fbaf263d115419f32rn82cc2421d3acdb5fbaf263d115419f32t " Th82cc2421d3acdb5fbaf263d115419f32n ur Don82cc2421d3acdb5fbaf263d115419f32

Answer 3

If you are using Windows XP, select the Network icon in the system tray >> properties >> In the General tab double-click Internet Protocol (TCP/P) and select Obtain IP Address automatically.

Answer 4

So, Here is my Step-By-Step guide to configuring a Wi-Fi network with BSNL DataOne. Though many wireless routers claim that it is a no-brainer setup to configure the wireless network, I found it to be not as easy as it looks to be. For example, NetGear comes with a wizard that never works with BSNL broadband connected via HUAWEI SmartAX 880. For those of you desperate to take your BSNL DataOne broadband wireless, follow these steps. It took me more than 2 days to figure and come out with these configuration details.



Before I start, let me share what I have with this bsnl broadband connection:



1)BSNL DataOne 256Kbps connection.

2)HUAWEI SmartAX MT880 (The modem supplied by BSNL).

3) (configuring netgear dg632 for BSNL)NetGear WGR614v5



There are 2 steps to configuring your wireless network. First, you have to change the default settings of the SmartAX MT880 modem and configure it to enable PPPoE (PPP over Ethernet). Second, you have to configure the NetGear Router to talk tothe modem.



Keep your modem, wireless router and your username and password from BSNL handy before you proceed to the next step.



If you want to change your existing configuration, take a backup of your configuration. This guide is to build your network from the ground-up.



1)Configuring and testing your Broadband connection

·Setup the modem as per the instructions mentioned in the manual. Ensure that the RJ11 (thin) cable from the splitter is connected to the ADSL port and the RJ45 cable connects your machine to the Ethernet port ofthe modem.



·Change the IP properties of your Ethernet card to the following:

192.168.1.2

255.255.255.0

192.168.1.1



·Open the browser and type http://192.168.1.1 to go to the HUAWEI configuration tool.



·Enter ‘admin’ as username and ‘admin’ as password



·Expand the Home node and select the WAN Setting



·Under this web page, configure the following:

PVC Number – PVC 0

Wan Type – PPP

Connection Type – PPPoE

VPI/VCI – 0 / 35

Default Route - Enabled

User Name –

Password –

Use DNS – Enabled

Max Idle Time – Always On



·Click on Apply and allow the modem to restart.



·Close the browser window



·Open the browser and type http://192.168.1.1



·Enter ‘admin’ as username and ‘admin’ as password



·You should see the Summary page. The Status is normally Red indicating that the connection is not ON.



·Click on the Plug icon in the Note column to connect.



·After the Connecting message, you should see the summary page again with the Status turning Green. Notice the IP Address and the Gateway Address.



·Expand Tools node and click on Misc.



·Type www.msn.com and click on Ping



·You should see Ping Result: Successful



·Click on the Lan Settings link under the Advanced node.



·Configure the following:

IP Address – 192.168.1.90

Subnet Mask – 255.255.255.0(/24)

Local Domain Name – Blank



·Click on Apply and allow the modem to restart



·Open the Network properties of your Ethernet card and change the IP properties to the following





IP Address – 192.168.1.2

Subnet Mask – 255.255.255.0

Default Gateway – 192.168.1.90

Preferred DNS server – 61.1.96.69 (BSNL DNS Server IP)

Alternate DNS server – 61.1.96.71 (BSNL DNS Server IP)



·Open your browser and type your favorite URL. You should be online by this time!





2)Configuring the Wireless Router and enabling the WPA security

·Connect the network cable from the NetGear wireless router to the machine.



·Open the IP Properties of your Network card and Enable DHCP. Select the following on the IP properites dialog.

Obtain IP Address Automatically

Obtain DNS Server Address Automatically



·Open the browser and type http://192.168.1.1/basicsetting.htm



·Enter ‘admin’ as username and ‘password’ as the password



·Click on Wireless Settings link on the navigation pane and configure with the following values



Wireless Network

Name (SSID) -

Region – Asia

Channel – 11

Mode – g and b

Security Options

WEP (Wired Equivalent Privacy)

Security Encryption (WEP)

Authentication Type – Automatic

Encryption Strength – 64bit

Security Encryption (WEP) Key

Passphrase -

·Click on Generate



·Record the value of Key1 – This is required when you log on to your Wi-Fi network the first time.



·Click on Apply and wait till the router reboots

(Wireless will not be enabled till you complete the next step)



·Click on the Basic Settings link on the left side navigation pane and configure the following



Does your Internet connection require a login? – No

Account Name – blank

Domain Name – blank

Internet IP Address

Use Static IP Address

IP Address – 192.168.1.91

IP Subnet Mask – 255.255.255.0

Gateway IP Address – 192.168.1.90

Domain Name Server (DNS) Address

Use These DNS Servers

Primary DNS – 61.1.96.69

Secondary DNS – 61.1.96.71

Router MAC Address

Use Default Address

·Click on Apply and wait till the router restarts



·Connect