As long as the XP disk is the same version (Home, Pro) it will work...
Note: To boot from your Windows CD/DVD, the BIOS settings on your computer must be configured to do this. On start up keep tapping either F1, F2, F10, (Be Aware that some manufacturers use F10 for system recovery!) Esc, or Del, to enter the BIOS set-up. Look for "Drive configuration", "Boot order" or similar and make the CD/DVD drive the first boot device. Save settings and exit.
Insert the Windows CD/DVD into your CD/DVD drive, and then restart your computer.
When you see the "Press any key to boot from CD" message, press a key to start the computer from the Windows CD/DVD.
Click to select any options that are required to start the computer from the CD/DVD drive if you are prompted.
When the "Welcome to Setup" screen appears, press 'R' to start the Recovery Console.
Or select your language and then press Next. Click on Repair your computer.
Select the operating system you wish to repair and click Next. Click on Command Prompt.
NOTE: If no operating system is available at this step, there is an issue with your installation that cannot be repaired by running chkdsk.
If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
When you are prompted, type the Administrator password. If you don't know the administrator password, there probably isn't one so just press Enter/Return.
At the command prompt (C:\>), type
chkdsk /r
(note the space between chkdsk and /r)
and press Return/Enter.
When the scan finishes, re-start.
-------------------------------
If you still get problems after the scan's done, use 'Repair' again but this time type
fixmbr
and press Return/Enter.
When the scan finishes, re-start.
If you still have problems, start over and type the following pressing Enter/Return after each line...
bcdedit /export C:\BCD_Backup
ren c:\boot\bcd bcd.old
bootrec /rebuildbcd
Restart the computer.
If none of this works, reinstall the OS.
© arou42