Right take some notes down here, because if you dont and do it wrong you may loose all your data....
What you need to do is get your hands on some white string, not cotton, not rope, string..
Tie knots down the entire peice of string leaving gaps of 12 centimetres in between the knots (any bigger and the data will not make it to the next knot, therefore you loose that peice of information forever), at either end you need to make a loop, about the width of a medium sized large cup of beans..
NOTE- The end that will be connected to PC needs to have a bigger loop due to the fact that this will have more data than the end which will be receiving the data..
To connect the string you need to get some black trecle and heat it up in a pan with 2 leaves from an apple tree, than is no more than 398 metres high.
Once the leaves are soggy, quickly put one leaf on the PC and one on the Laptop, and lay the loop ontop of your still hot leaf..
Congratulations you have now connected the two devices together...
All you need to do is click on the "START" icon on the bottom left page (from your PC) to commense the transfer of data..
Hope this Helps!!